Engineering Products

A pulley, also called a sheave or a drum, is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present. Pulleys are used to change the direction of an applied force, transmit rotational motion, or realize a mechanical advantage in either a linear or rotational system of motion. It is one of the six simple machines. Two or more pulleys together are called a block and tackle.

We offer a wide range of industrial pulleys, some of which are as follows:

A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. A coupling can be rigid or, more normally, it can be flexible allowing relative radial, axial or angular movement of the two shafts. The coupling transmission is not designed to engage-disengage as a normal operation. Couplings do not normally allow disconnection of shafts during operation, though there do exist torque limiting couplings which can slip or disconnect when some torque limit is exceeded.

The primary purpose of couplings is to join two pieces of rotating equipment while permitting some degree of misalignment or end movement or both. By careful selection, installation and maintenance of couplings, substantial savings can be made in reduced maintenance costs and downtime.

Various industrial couplings that we offer to our clients are as follows:

Transmission chains are the type of chains most commonly used for transmission of mechanical power on bicycles, motorcycles, and in industrial and agricultural machinery. These are simple, reliable, and efficient means of power transmission.

We offer various transmission chains that are made from superior quality materials and go through stringent quality checks. Moisture proof, chemical resistant and high strength industrial chains are being manufactured by us. The wide catalogue of industrial chains encompasses roller chains, conveyor chains, elevator bucket chains, lifting chains, P.I.V. chains, silent chains, slat chains, link chains, wire ropes, Bi-planner chains, connecting locks etc. We are a renowned mild steel and stainless steel chain supplier in India. We offer various advantageous deals of wholesale roller chain in the market. This stainless steel industrial chains are widely used in different industries such as sugar industry, rice mills, rolling mills, textiles and hand-loom industry, cement factories and so on.

Our transmission chains are available at very economical prices.

Various transmission chains that we offer are as follows:

• SIMPLEX, DUPLEX, TRIPLEX,..nth  STRANDS etc
• TWO WAY SPROCKETS
• TAPER LOCK SPROCKETS
• CONVEYOR SPROCKETS
• ATTACHMENT SPROCKETS
• CAST IRON SPROCKETS
• SPROCKET RINGS
• IDLERS
• SPROCKETS IN ALLOY STEEL & TEETH HARDENING

Sprockets are teeth like projections arranged on a wheel rim to engage the links of a chain. They engage chains in many different power transmission and conveyor systems. They are mainly made of cast iron, sintered metal, and carbon steel. Inserted sprockets are also designed to reduce noise and operation. The sprocket must be inspected once a month for wear and if the teeth are worn down or are broken they should be replaced.

They are often an economic, reliable drive system for long running, continuous drive applications with maximum absorption of shock and minimum torque loads. The sprockets and the chain must be lubricated with chain lube such as bell ray. Sprockets are most commonly used in bicycles.

We are one of the well recognized spur gears manufacturers. We manufacture ample assortment of industrial gears such as helical gears, bevel gears, worm & worm gears, racks & pinions, ratchet gears, spiral bevel gears, herringbone gears, hypoid gears, etc. We are specialized helical gears exporter from India. These helical gears synthesizes gear tooth of standard sizes, which make them shatter resistant and abrasion resistant. Our state-of-the-art technology assists us in manufacturing high functioning machine cut industrial gears.

• SPUR GEARS
• HELICAL GEARS
• BEVEL GEARS
• WORM & WORM GEARS
• RACKS & PINIONS
• RATCHET GEARS
• SPIRAL BEVEL GEARS
• HERRINGBONE GEARS
• HYPOID GEARS etc.

A bearing is a device to allow constrained relative motion between two or more parts, typically rotation or linear movement.

We offer various industrial bearing to cater to varied industries. Our bearings are made from the finest quality materials and stringently quality checked.

Ball Bearing
Roller Bearing
Taper Roller Bearing
Needle Bearing
Bush Bearing
UCP
UCF
UCFL
UCT
Thrust Bearing
Pillow Block
Plummer
Block

We are a well known manufacturers and suppliers of Industrial Belts. Our range is widely appreciated for the features like to abrasion, and corrosion resistance, and excellent performance even at high temperature. Our range is widely used for holding, pushing, assembling, capping, actuate, print, and transfer. In addition, we also offer V-belts, timing belts, conveyor belts, cotton belts, polyurethane belts, slings, and rubberized belts. These various industrial belts are impeccably suitable for holding, pushing, assembling, capping, actuate, print, and transfer and so on.

Products offered under this category are:

• VBELTS
• TIMING BELTS
• CONVEYOR BELTS
• COTTON BELTS
• POLYUREATHANE BELTS
• RUBBERISED BELTS
• BELTS WITH STEEL CORD
• FLAT BELTS
• VARIABLE SPEED BELTS
• SLINGS

    We also offer a range of Power Transmission Products which are highly efficient for long term use. They facilitate the working of many industries specially in automotive industries. They are available in client  recuriment  types. They are manufactured using mild steel and stainless steel.